BEIJING, Nov. 20, 2026 /PRNewswire/ — A report from China Daily.
In Korla, at Xinjiang Tianshan Cement’s Tashidian branch, the rotary kiln runs around the clock. At the heart of the cement production line is the clinker burning workshop, where workshop director Cui Huanzhang has worked for nearly 20 years.
“When we came to this land in 2008, it was nothing but desert all around. The sandstorms were fierce in both winter and summer, and the working conditions were harsh,” Cui said. “The equipment was outdated and its performance was poor. All inspections had to be done by hand, with a very low level of automation.”
The clinker burning workshop runs at high temperatures nonstop. “It is the nerve center of the entire cement line. Every set of readings and the condition of every piece of equipment directly affect our ability to maintain production,” Cui explained. The equipment runs continuously while the crew works in three rotating shifts. “If any single piece of equipment goes down, the entire line shuts down,” he added.
To boost efficiency through green and low-carbon practices, Cui led his team in a push for technological upgrades. The toughest part was the system upgrade in 2024, when they expanded the project from 2,500 metric tons to 3,600 a day. “After rounds of discussion and testing by the whole team, in June 2025 we reached the target output of 3,600 tons of clinker a day, meeting quality standards,” he said.
The upgrades cut coal and electricity use. Coal consumption dropped from 130 kilograms per ton of clinker to 119 — a saving of 11 kg. Power consumption dropped from 58 kilowatt-hours per ton to 48. Using the waste heat from the kiln head and tail, they set up a steam turbine power generation system, cutting the plant’s outside electricity purchases by 40 percent.
Any sudden breakdown calls for immediate action. In June 2023, the kiln system became unstable and the support roller bearings ran hot, with temperatures reaching 160 degrees C. “When the call came in, I rushed to the site. First I cut off the feed and the coal, then got straight into the emergency repairs,” Cui said. In four hours, the bearing temperature returned to its normal level of 65 degrees C and the entire line was restarted.
In 2024, after the upgrade, the system experienced raw meal dropouts and thermal instability. Cui and his team went digging through the data curves to find out why. They resized the riser duct from 1.8 meters down to 1.75 — and just like that, the whole system was back to normal.
In the eyes of his colleagues, Cui is the director who is always out front. “He’s the first one out there on the front line of every job we do. Unfazed by difficulty, Cui meets every challenge head-on and throws himself into his work,” one of Cui’s colleagues said.
For Cui, skills are meant to be passed down. “When I’m training someone, I don’t like teaching only textbook theory. On the firing line, you’ve got to be out on the floor; in the control room, you learn to read the data; out on site, you learn to listen to the equipment and read the flame in the kiln,” he said. “When something goes wrong, I don’t just hand them the answer. First I guide them to work through the problem themselves, then we go over it together.”
“As a modern skilled worker, my mission is to make products that meet quality standards and support local development,” Cui said.
“When we innovate, it’s all about saving energy, cutting costs, and going green and low-carbon. When a tough problem comes up, you can’t sidestep it — you’ve got to tackle it head-on,” he added.
View original content to download multimedia:https://www.prnewswire.com/news-releases/keeping-korlas-cement-kiln-running-302946727.html
SOURCE China Daily
